For the Spray Dryer manufacturer Wuxi Dongyusheng, there are many products produced by it. Among them, the spray Dryer and some specific types are its main products. In addition, there are other types of dryers. . Therefore, if you want to fully familiarize yourself with all dryer products on the website, then you can't just concentrate on their main products. Therefore, next, come to recognize other products to achieve the above-mentioned goals.
1. How to achieve mass transfer and heat transfer enhancement in a rotary flash dryer? In the rotary flash dryer, to achieve the enhancement of mass transfer and heat transfer, this is not difficult for the spray dryer manufacturer Wuxi Dong Yusheng, as long as the hot air enters the stirring crushing drying chamber at an appropriate speed, and thus, The material is sheared, bumped, and rubbed to make it particles. This way, this goal can be achieved with good results.
2. What are the heat sources that can be used for the rotary flash dryer if the material is dried? This question, the specific answer given by the spray dryer manufacturer Wuxi Dongyusheng is: For the dry mud paste materials, there are many options for rotary flash dryers, such as steam and heat transfer oils. , electric heating and stoves, etc. In addition, it can also be a combination of steam and electric heating. However, in these specific categories, steam and hot blast stoves are used more often. If the material has high temperature resistance, then it is recommended to use a hot blast stove.
3.XZG type rotary flash dryer, before operation, why should you open the induced draft fan? In this Case, for specific reasons, the spray dryer manufacturer Wuxi Dongyusheng believes that the main reason is to ensure the gas flow, so that the dryer can work under a slight negative pressure condition, thereby ensuring the working results. Therefore, it is necessary to first pneumatically draw the fan, then the blower, and the order cannot be reversed.
