The cost of the
Dryer used in the industry may be very large, but if you use a vapor analyzer, you can help reduce the cost of heating, although the small size, but the role is very large, it is worth our installation in the drying, but also have Learn more clearly before you can. KJG
Hollow Blade Dryer manufacturers introduce a lot of drying in the work process, must use chemical solvents for the production of the product, the end result is that it is often used as a method of evaporating the solvent, in an online application description of it, moving And heating a lot of air can be expensive. In general, one method of cost control is to reduce ventilation, and only drying at this point is to ensure the expected production speed. However, careful control of the instrument can be dangerous, resulting in inadequate ventilation of flammable vapors, causing fire or explosion. LEL is the lower explosion limit, which is the low concentration of solvent vapor in the air. If given a source of ignition, it will continue to burn. By providing a method that can estimate or calculate ventilation requirements, it is possible to achieve a low-cost method of LEL. In most
Cases, it is estimated that the use of three airs per gallon of solvent evaporation is required. KJG Hollow Blade Dryer Manufacturers Introduction Adding analyzers is often overlooked because they seem unlikely, say control instruments. For example, when a hot oxidizer reaches its large rated air volume, it can prevent the new process line from going out without a significant investment. Instead of adding another oxidizer to the new equipment, manufacturers can reduce the exhaust gas recirculation from the existing production line. With the solvent vapor analyzer, the cost will be quickly recovered.
