The disk is combined with a single hollow shaft for heat exchange, the tube manufacturing process is introduced into the dry system, which increases its reliability and reduces costs. Its characteristics are as follows: 1. The use of steam as a heat transfer medium can be used for the semi-drying process and the drying process, the system is simple and some auxiliary equipment. 2. Provides a carrier gas supply port, which allows for smoother exhaust emissions and reduces auxiliary air and exhaust gas treatment equipment. 3. There is no connection between steam and sludge, which is contained in the tail gas of small insoluble gas, which can cause a secondary pollution. 4. Oxygen content, temperature, and dust concentration are very low. During operation, the system is safe. 5. Horizontal disc drying heat transfer is performed through the shell wall, hollow shaft and the left and right side of the vertical plate, heat transfer area, compact structure, small size. 6. The sludge drying is wet, in order to avoid the wet sludge sticking to the rotating disc, there is a long blade to fix the disc stirring sludge and clean disc surface between the inner wall and the gap between the gaps. After being crushed and agitated, the sludge becomes granular, which facilitates further treatment. 7. The tray
Dryer uses a low temperature heat source (≤180°C) to heat so that the sludge on the tray does not overheat and is stopped after running. 8. Large amount of sludge treatment, stable operation can ensure that even if the feed is not uniform, the operating resistance is small, and the internal power consumption is significantly reduced. The top cover can be fully opened for easy maintenance. 9.PSG disc continuous dryer has high reliability, can reduce maintenance and maintenance, can be continuously operated day and night, run 8000 hours, can be guaranteed every year. After accidental power failure, the dryer can be started with a load and stable operation. In the company's construction, it is very durable.
