Industrial waste slag Dryer
DESCRIPTION
Nickel Catalyst Rotary Spin Flash Dryer are used for drying a wide range of products. It can be used to dry both organic and inorganic chemicals. However, inherently there are few limitations in the flash drying concept and experts like us provide best solutions to this family of drying systems.
Industrial waste Drying Equipment
CHARACTERISTICS
The rotor at the conical base of the drying chamber fluidizes product particles in a drying-efficient hot air flow pattern in which any wet lumps are rapidly disintegrated. Using the heat from the airstream, the material dries as it is conveyed. Product is separated using cyclones, and/or bag filters. Typically, cyclones are followed by scrubbers or bag filters for final cleaning of the exhaust gases to meet current emission requirements.
Airborne, fine particles pass through a classifier at the top of the drying chamber, while larger particles remain in the air flow for further drying and powdering.
Nickel Catalyst Rotary Spin Flash Drying Equipment
ADVANTAGES
• High drying efficiency and low energy costs
• Direct drying with no initial diluting
• Continuous processing with short drying time
• Low operator overheads and minimum maintenance costs
APPLICATION
Flash dryers have been used to dry products in many industries including food, chemical, mineral and polymer. A broad range of feed materials including powders, cakes, granules, flakes, pastes, gels, and slurries can be processed. For slurries, pastes, or sticky materials, back mixing of the wet feed with a portion of dry product to produce a suitable conditioned material is required. This technology can also be used for cooling applications.
• Agrochemicals
• Ceramics
• Food and feed products
• Inorganic chemicals
• Organic chemicals
• Pharmaceuticals
• Pigments and dyestuffs
TECHNICAL PARAMETERS
| Model | XSG-2 | XSG-4 | XSG-6 | XSG-8 | XSG-10 | XSG-12 | XSG-14 | XSG-16 |
| Barrel diameter,mm | 200 | 400 | 600 | 800 | 1000 | 1200 | 1400 | 1600 |
| Main machine dimensions,mm | 250*2800 | 500*3500 | 700*4200 | 900*4600 | 1100*5000 | 1300*5200 | 1500*5400 | 1700*6000 |
| Air amount,m3/hr | 300-800 | 1250-2500 | 2500-5000 | 3000-8000 | 5000-12500 | 10000-20000 | 14000-27000 | 18700-36000 |
| Evaporated moisture,kg/h | 10-20 | 25-70 | 40-200 | 60-600 | 100-1000 | 150-1300 | 200-1600 | 250-2000 |
| Power of main machine,KW | 5-9 | 10-17.5 | 20-29 | 24-35 | 40-62 | 50-89 | 60-105 | 70-135 |
- Flash Dryers are characterized by short residence time of few seconds. Hence, great care needs to be taken in dispersion of the feed in the drying air, which is generally in the form of cake so that true surface water gets evaporated form the feed . Otherwise, the larger particles in the feed material may require longer drying time than the smaller ones in order to reach the desired moisture content.
Contact Now
