For the pressure
Spray Dryer in the
Dryer, I believe we will not be unfamiliar, because it is one of the products of the website, and it is also one of the keywords of the website, so in the front, we have started this aspect. Learning to work so that we can gradually understand and understand, and at the same time, can also increase their expertise in this area, rather than nothing. The
1. A pressure spray dryer. Can it be used to obtain a certain proportion of spherical particles for this type of dryer? A pressure spray dryer, which is one of the dryers, and, from a professional point of view, it can be dried and pelletized at the same time. Therefore, based on this, the answer to this question is yes, that is, by using appropriate pressures and flow rates, it is possible to obtain a certain proportion of spherical particles. The
2. What is the cleaning of the pressure spray dryer? Pressure
Spray Dryers, after they have been used for a long period of time, are to be cleaned. If they are specific, they are actually: Cleaning the aggregates in the drying tower, and collecting dust in the cyclone separators. Clear it and clean it up. In addition, clean the dust remover and check if you want to use a new filter bag. The slurry piping system must also be cleaned. Moreover, it must be carried out in an all-round way. There can be no dead ends. The
3. Is it necessary to do a thorough and detailed inspection of the pressure spray dryer? For pressure spray dryers, to conduct inspection work, then, it is necessary to be comprehensive and specific. And, this is also an important task for all of us. Therefore, what it includes is: The motor in the dryer is mainly to see if there is abnormal situation such as fever, abnormal sound, etc., as well as to check the normal operation of the instrument and the electric appliance.