Resin
Granulator correct operation has the use of prolonging the service life of the equipment, however, the use of resin granulator in our daily life does not get enough attention, at the same time will cause some unnecessary problems, need to keep in mind the following points.
1, pay attention to fire safety, the production process of resin granulator must be placed around the fire extinguisher.
2, do not use low-quality back to the material with metal impurities or sand (feeding process is best to add a feeding iron removal machine to remove iron in the plastic), near the feed port shall not be placed in the metal that may fall into, placed into the feed hopper to aggravate wear and tear of the screw, barrel, or produce jamming, damage phenomenon.
3, there is a failure or abnormal situation must be reported to the relevant personnel, and by professional maintenance personnel to deal with. If you find any abnormal phenomenon affecting safety, immediately press the emergency stop switch to cut off the power supply.
4, granulator manufacturers tell you plastic machinery operation should be strictly in accordance with the requirements of the operating procedures, not in the non-operating station for unauthorized operation. To ensure the reliability of the safety device, shall not be in pursuit of efficiency to destroy the machine's safety measures.
5, resin granulator gear box should be injected to meet the requirements of the lubricating oil, and regularly replaced.
6, by trained and familiar with the structure and performance of plastic machinery and operating procedures for the operator to operate.
7, resin granulator production operation, plastic temperature has not reached the set temperature, insulation time is not enough, are not allowed to start running screw.
